Page 17
The Model Naming function allows you to name each of the 10 different models that can be saved in the transmitter.
This makes it easier to keep track of the different models since you can give each one a specic Model Name.
Model Names can consist of up to 3 upper-case letters, numbers, or symbols, or a combination of the three.
Naming Your Model
1) Before naming your model, use the Model Select function to choose and load the Programming Data for the
particular model number (0~9) that you would like to Name. For more information, see page 12.
2) Press the SEL key until the NAME menu is displayed. The current Model Number
and Model Name will be displayed in the Programming Window. The currently
selected Model Name character will ash.
3) Press the CH key to move to the character you would like to change. That selected
character will ash.
4) Press the + or - keys to change the selected character. Choose from upper-case
letters, numbers, or symbols.
5) Repeat steps 3 and 4 to select and change the remaining Model Name characters to suit your preference.
The MX-Sport transmitter features Digital Trim Memory. Any amount of Steering or Throttle Trim that you set during
use by pressing the Trim switches is automatically stored in memory for that specic channel and for that specic
Model Number. The Trim values for each model will automatically be loaded when the transmitter is turned ON.
Using the Trim Switches
1) When you press a Trim switch, the Trim
value and channel will be displayed in the
Programming Window. Press the right side of
each Trim switch (forward) to increase Trim in
one direction and press the left side of each
Trim switch (backward) to increase Trim in the opposite direction. The current amount
of Trim for that particular channel is displayed in the Programming Window.
CH1 TRM setting range is L25 to R25. The default setting is 0. CH2 TRM setting
range is F25 to B25. The default setting is 0.
Once the maximum Trim value has been reached for a particular channel, an audible tone will continue to
sound when you press the Trim switch, however, the Trim value will not increase.
Setting Up Your Model's Control Linkages
Ideally, you don't want to use any more Trim than necessary to center the servos prior to installing your model's
control linkages. Using too much Trim to center the servos can affect overall servo travel. Follow these procedures
to properly set up your model's control linkages:
1) Use the Trim switches to set the Steering and Throttle Trim values to 0.
Each time a Trim switch is pressed, the Trim moves in small, stepped increments and a single audible
tone sounds.
Continued on Next Page
(116 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais