AIRTRONICS VG6000 Especificações descarregar pdf (Página 14)

Page 14

VG6000

DUAL RATE AILERON AND ELEVATOR ( D/R )

This feature allows you to set a minimum and maximum control

rate for ailerons and elevator with the use of a dual rate switch.

Move the cursor to high-lite the EL D/R. By moving the Dual Rate

Elevator switch you can see the 1 and 2 turn off and on in

conjunction with the switch location 1 or 2.

Depending on how you like to use your dual rates will depend on the

switch direction you want the fast rate to be. For example you would

like to take off and fly on a lower rate with the switch in the #1 position

and for landing you want a faster rate on position #2.

First set the elevator dual rate switch to the #1 position. You can see on the screen that the percentage is 100. Use

the DEC- key to lower the number to about 75%. This will give you 25% less movement than the faster rate on position

#2 making position #1 your low rate and #2 your fast rate for landing. Repeat the same for Dual Rate Ailerons by

moving the cursor to the AL D/R.

Use the ( INC+ ) or the ( DEC- ) to raise or lower the percentages from 0 to 150%.

EXPONENTIAL ELEVATOR AND AILERON ( EXP )

Exponential allows you to change the amount of movement the

servo has compared to the stick movement. For example, when

you move the aileron stick left or right the servo will move at

the same rate as the stick when expo is set at 0. When flying

your aircraft with 0 expo, you will have the felling of 1 to 1 or a

linear fell. By increasing the expo to about 40% you will change

the amount of servo movement compared to the amount of stick

movement. When adding expo you will see that the servo will

move slower or less amount in the middle to 40% of your stick

movement. This will soften the fell of your ailerons around the middle area of the stick but will still give you full servo

movement at the end of the stick. Use the FUNCTION keys to move the cursor the EL EXP or AL EXP and press the

INC+ key to add expo.

A good starting point for aileron expo is +25% and use +5% for elevator.

Expo can be set for both switch positions 1 and 2.

NOTE: using Negative expo will make your ailerons and elevator more sensitive in the middle stick area which will

make the aircraft reactions very fast. Adjustment is from +100 to -100.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Sem comentários

AIRTRONICS VG6000 Especificações Página 14