AIRTRONICS MX-V Guia do Utilizador descarregar pdf (Página 13)

V 3

CHANNEL 2.4GHZ RADIO SYSTEM USER'S GUIDE

EPA - END POINT ADjUSTMENT

Adjusting the Auxiliary Channel 3 End Point Adjustment Percentage Values:

Auxiliary Channel 3 can be used for a number of different uses. One of the more common uses would be for the reverse function

in a glow-powered monster truck. Often, the transmission only requires a small amount of travel, but the servo binds because

of too much servo travel. In such a case, Auxiliary High servo travel and Auxiliary Low servo travel are adjustable using the End

Point Adjustment function.

1) From within the EPA menu, press the MENU UP or MENU DOWN keys to display

AUX H or AUX L 100%.

2) Push the Auxiliary Lever down. AUX L should be displayed. Press the INCREASE

DECREASE keys to increase or decrease the Auxiliary Low End Point Adjust

ment

percentage value. Increasing the percentage value will increase

auxiliary servo travel in that direction and decreasing the percentage

value will decrease auxiliary servo travel in the that direction.

EPA AUX L setting range is 0% to 150%. The default setting is 100%.

EPA AUX H setting range is 0% to 150%. The default setting is 100%.

3) Push the Auxiliary Lever up. AUX H should be displayed. Press the INCREASE

DECREASE keys to increase or decrease the Auxiliary Low End Point Adjust

ment

percentage value. Increasing the percentage value will increase

auxiliary servo travel in that direction and decreasing the percentage

value will decrease auxiliary servo travel in the that direction.

The Exponential function allows you to vary the amount of servo travel in relation to the movement of the steering wheel and

throttle trigger near the Neutral positions to change the way those functions react to control movement. Decreasing the Exponential

percentage values will soften the control feel around Neutral and increasing the Exponential percentage values will heighten the

control feel around Neutral. Using a lower negative value allows for smoother control. Using a higher positive value may result

in more 'twitchy' control response.

The Exponential function can be adjusted for the Steering channel and the Throttle channel.

EXP - EXPONENTIAL

1) Press the MENU UP or MENU DOWN keys to open the EXP menu. EXP will flash

and ST 0% will be displayed.

Adjusting the Steering Exponential Percentage Value:

Steering Exponential can be variably adjusted from Mild through Linear to Quick to allow you to set the most effective steering

response for your model. Generally, if your model over-steers, reduce the Exponential percentage value, and if your model

under-steers, increase the Exponential percentage value.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sem comentários

AIRTRONICS MX-V Guia do Utilizador Página 13