AIRTRONICS MT-4s Guia do Utilizador descarregar pdf (Página 22)



T R

Choosing the Channel:

Exponential or Adjustable Rate Control percentage values can be adjusted from Mild through Linear to Quick to allow you to

set the most effective control response for your model. For example, if your model over-steers, reduce the Steering Exponential

or Adjustable Rate Control percentage value, and if your model under-steers, increase the Steering Exponential or Adjustable

Rate Control percentage value.

As another example, reduce the Throttle Exponential or Adjustable Rate Control percentage value on a slippery track or with a

model that has a higher-torque motor or engine, and increase the Throttle Exponential or Adjustable Rate Control percentage

value on a high-grip track or with a model that has a lower-torque motor or engine.

1) From the Top Screen, press the ENTER key to open the Programming Menu list.

2) Scroll UP or DOWN to highlight the CURVE menu, then press the ENTER key. The CURVE

menu will be displayed and the cursor will default to [ST].

3) Scroll DOWN to move the cursor to the channel you would like to make Programming

Value changes to. Choose from <CURVE> [ST] (Steering), <CURVE> [TH] (Throttle),

<CURVE> [A1] (Auxiliary 1) or <CURVE> [A2] (Auxiliary 2).

Choosing the Curve Type:

The Exponential and Adjustable Rate Control functions work the same, except the Exponential Rate percentage value is

programmed from a fixed Neutral Point of 50% and the Adjustable Rate Control Rate percentage value is programmed from a

user-adjustable Neutral Point, giving you even greater programming control. For more information, see the Adjusting the Point

Percentage Value section below.











CURVE TYPE setting range is EXP and ARC. The default setting is EXP.

1) Press the ENTER key to highlight TYPE EXP. Press the ENTER key a second time, then

scroll UP or DOWN to choose the desired Curve Type. If you are programming the Curve

function for the Throttle channel, you have the option of adjusting the Curve Type for the

Throttle High Side (TYPE-H) and the Throttle Brake Side (TYPE-B) independently.

Adjusting the Rate Percentage Value:

The Rate percentage value determines the desired amount and type of Exponential or Adjustable Rate Control, either Quick,

Mild or Linear (see diagrams on the previous page).

1) From within the CURVE menu, scroll DOWN to highlight RATE 0%. Press the ENTER key,

then scroll UP or DOWN to increase or decrease the Rate percentage value. Using a

negative Rate percentage value will soften the control feel around Neutral and using a

positive Rate percentage value will heighten the control feel around Neutral.

CURVE RATE setting range is -100% (Mild) to 100% (Quick). The default setting is 0% (Linear).

Changes to the Rate percentage value affects both the channel High side and Low side equally, except for the Throttle

channel, in which the Throttle High and Throttle Brake sides can be adjusted independently.

Adjusting the Point Percentage Value:

The Point percentage value determines the Neutral Point where the Rate percentage value begins. For example, you may not

want the Point to be centered between the High and Low End Points. You may want the Point to be offset from the center

position.

The Point percentage value option is available ONLY when the TYPE ARC option is selected.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

Comentários a estes Manuais

Sem comentários

AIRTRONICS MT-4s Guia do Utilizador Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Controlos remotos AIRTRONICS MT-4s